2.2 Switching On/Off the Power 37
2.2 Switching On/Off the Power
Switching On the Power
1. Press the power switch of the printer to the
<I> position.
2. When the power is on, [Please wait...] is
displayed on the control panel. Check that
this display changes to [Ready to Print].
Important
• When the display reads [Please wait...], the printer is
warming up and is not ready to print yet.
• If an error message is displayed, refer to "6.6 Error
Messages (in Alphabetical Order)" (P. 115) for
information on how to fix it.
Switching Off the Power
Important
• Do not switch the power off when the display reads [Please wait...].
• Do not switch off the power to the printer when printing is in progress. It may lead to a paper jam.
• Once the power is switched off, print data remaining in the printer or information saved in the memory of
the printer will be deleted.
1. Check the display on the control panel, to
confirm that the printer is not processing
any data.
2. Press the power switch for the printer to the
<{> position to switch off the power.
Ready to Print
To Next Page
Loading...
Need help?
General