4.2 Loading Paper 79
Notes on Loading Envelopes
To load envelopes in the bypass tray, insert the envelopes with the flaps closed. The print
side must be facing down. You can load envelopes up to the maximum fill line in the tray at
one time.
Sometimes the wrinkle might be generated on envelopes. In that case it is likely to be
improved by changing the position of the flap.
Important
• For best performance, do not use envelopes that:
• Have excessive curl or twist
• Are stuck together or damaged in any way
• Contain windows, holes, perforations, cutouts, embossing
• Use metal clasps, string ties, or metal folding bars
• Have an interlocking design
• Have postage stamps attached
• Have any exposed adhesive when the flap is in the sealed or closed position
• Have nicked edges or bent corners
• Have rough, cockle, or laid finishes
Extending the Output Tray Extension
The output tray extension prevents printed output
from falling off the printer.
When printing documents, extend the output tray
extension.
To Next Page
Loading...
Need help?
General