Xerox Phaser 6120 Reference Guide

Specifying Printer Driver Settings
109
Installed Options
Text Halftone Specifies the halftone for text as Detail or
Smooth.
 The default setting is Detail.
Text RGB Gray Treatment Specifies the RGB Gray Treatment as
Composite Black, Black and Gray, or
Black Only.
 The default setting is Black and Gray.
Text RGB Intent Specifies RGB intent for text as
Photographic, Vivid, Relative Color, or
Absolute Color.
 The default setting is Vivid.
Text RGB Source Specifies RGB source for text as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
 The default setting is sRGB.
Parameters Settings
Disk Select Installed if the optional Hard Drive for
the printer has been installed.
 The default setting is Not Installed.
Duplex Unit Select Installed if the optional duplex unit for
the printer has been installed.
 The default setting is Not Installed.
Input Tray Select Installed if the optional trays for the
printer have been installed.
 The default setting is Not Installed.
Parameters Settings

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm