Xerox Phaser 6120 Reference Guide

Printing a Document110
Printing a Document
The contents and available options that appear in the print dialog box may
vary depending on the application being used. The description of the
operation for Red Hat is provided below.
Example Using LPR Command
With applications other than OpenOffice, the following print dialog box
appears.
1 Click Properties in the Print dialog box.
The Print Properties dialog box appears.
2 Enter the command “lpr -P” followed by the name of the printer, and then
click OK. The Print dialog box appears again.
3 Click Print to print the document.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm