Xerox Phaser 6120 Reference Guide

Configuring the Printer120
Configuring the Printer
The Configuration page enables you to view and change the configuration
settings of the printer.
System Page
About Printer (shown above)
The System/About Printer window provides the following information:
Item Description
Printer Name/Status Shows the name assigned to your printer, and
displays the current status of the printer-just as it is
displayed on the printer’s control panel.
" The status display enables you to remotely
identify possible printer problems, such as out
of paper and out of toner.
Device Status (Product
image)
Identifies the type of printer that you are browsing.
The printer is pictured in the illustration with all
installed options.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm