Xerox Phaser 6120 Reference Guide

Configuring the Printer
131
Printer Name Sets the printer name.
Default: Phaser 6120
Start Page Sets the printer to print a startup page when the
printer is powered on.
Choices: Yes, No
Default: No
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/STARTUP
OPTIONS/STARTUP PAGE
Resets If None is selected, no action is performed.
If Restore Factory is selected, restores the factory
default settings of the printer.
If Save Custom is selected, saves any changes to
the printer parameters as the Custom settings.
If Restore Custom is selected, restores the Custom
settings of the printer.
Choices: None, Restore Factory, Save Custom,
Restore Custom
Default: None
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/RESTORE/
SAVE
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Item Description

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm