Xerox Phaser 6120 Reference Guide

192
Default Router
Subnet Mask
Enable HTTP
Enable Auto IP
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between
triplets.
Default 000.000.000.000
Purpose Sets the subnet mask value of the network. The subnet
mask enables you to limit access to your printer (for
example, according to departmental divisions).
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between
triplets.
Default 000.000.000.000
Purpose Specify whether or not HTTP is used. Selecting NO
disables CentreWare IS.
Range YES
NO
Default YES
Purpose Select whether or not the IP address is automatically
acquired when DHCP/BOOTP and PING, ARP are not
functioning or when there is no response.
Range YES
NO
Default YES

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm