Xerox Phaser 7100 User Manual

Maintenance
74 Phaser 7100 Color Printer
User Guide
3. Press the Power Saver button again to return the printer to Ready mode.
4. Use a soft, lint-free cloth to clean the outside of the output tray, paper trays, and other exterior
areas of your printer.
Cleaning the Laser Lenses
The printer is constructed with four laser lenses. If prints have voids or light streaks through one or more
colors, use the following instructions to clean the laser lenses.
CAUTIONS:
• Ensure that nothing touches or scratches the surface of the transfer belt. Scratches,
dirt, or oil from your hands on the belt can deteriorate print quality.
• Ensure that nothing touches or scratches the surface of the imaging drum. Scratches,
dirt, or oil from your hands on the drum can deteriorate print quality.
• To protect the imaging units against bright light, close Cover C within 10 minutes.
Longer exposure can deteriorate print quality.
WARNING: If you accidentally get toner on your clothes, lightly dust them off as best as you can. If
some toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on
your skin, wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out
immediately with cool water and consult a doctor.
1. Open Cover A.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm