Xerox Phaser 7700 Install Guide

22 Phaser 7700 Color Printer
EtherTalk Configuration
Changing the Printer’s EtherTalk Zone (Optional)
Using PostScript utility files
The printer's CD-ROM also contains the Adobe Type Manager program, PostScript fonts,
and TrueType fonts to match the printer's resident fonts. For information on installing the
program and the fonts, refer to the Readme on the CD-ROM in the \Utility\Atm folder.
Using CentreWare IS
1. Connect to the printer via CentreWare IS (see page 24).
2. From the main CentreWare IS page, click Properties.
3. In the Protocols group on the left side of the screen, click EtherTalk.
4. In the Zone field, type the desired zone, then click Save Changes at the bottom of the
page.

Xerox Phaser 7700 Specifications

General

Brand	Xerox
Model	Phaser 7700
Category	Printer
Language	English