Xerox Phaser 7700 Install Guide

26 Phaser 7700 Color Printer
Printer Management
Intelligent Ready
Intelligent Ready is an automated system that monitors the printer’s usage and warms up
the printer when you are most likely to need it. You can turn Intelligent Ready on or off
from the printer’s front panel. CentreWare IS provides full control of the printer’s
automatic warm-up and standby settings.
Enabling and Disabling Intelligent Ready From the Front Panel
To turn Intelligent Ready mode on or off, on the front panel:
1. With Menus highlighted, press the OK key.
2. Scroll to Printer Setup Menu by pressing the Arrow Up or Arrow Down key.
3. Press the OK key.
4. Scroll to Intelligent Ready by pressing the Arrow Up or Arrow Down key.
5. Press the OK key to select On or Off.
6. To exit the menu system, scroll to Exit and press the OK key.
Setting up Intelligent Ready Using CentreWare IS
1. Connect to the printer via CentreWare IS (see page 24).
2. On the right side of the page, click Properties.
3. In the General group, click Warm-up.
4. Follow the instructions on the page to set up Intelligent Ready or standby settings.
5. Click Save Changes to save your changes.

Xerox Phaser 7700 Specifications

General

Brand	Xerox
Model	Phaser 7700
Category	Printer
Language	English