CClleeaanniinngg tthhee FFeeeedd RRoolllleerrss oonn tthhee DDuupplleexx AAuuttoommaattiicc DDooccuummeenntt
FFeeeeddeerr
1. Open the Top Cover.
2. Wipe the feed rollers with a dry, soft, lint-free cloth until they are clean.
Note: If the feed rollers get stained with toner or debris, they can cause stains on the
documents. To remove the stains, use a soft lint-free cloth dampened with a neutral
detergent or water.
3. Close the Top Cover.
CClleeaanniinngg tthhee IInntteerriioorr
WARNING:
• Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet of
paper is wrapped around the heat roller, do not try to remove it immediately. Power off the printer
immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer has
cooled.
• If you spill any toner in the printer, remove the toner using a moist cloth. Never use a vacuum
cleaner to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.
To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
184
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
