Xerox VersaLink C605XT User Manual

To adjust the fuser:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Fuser Temperature Adjustment.
3. To select the paper type, touch Paper Type, then touch the name of the paper type in the list.
4. To increase or decrease the fusing temperature, touch the arrow buttons, then touch Adjust.
5. To adjust the Fuser for another paper type, select it from the list, then repeat steps 3 and 4.
6. To exit the menu, touch X.
7. To return to the Home screen, press the Home button.
AAddjjuussttiinngg tthhee AAllttiittuuddee
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed.
If the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Altitude Adjustment.
3. Touch the altitude of the location of the printer, then touch OK.
4. To return to the Home screen, press the Home button.
PPeerrffoorrmmiinngg aa DDeevveellooppeerr aanndd TTrraannssffeerr RRoolllleerr CClleeaanniinngg
PPrroocceedduurree
When a printer sits idle for an extended time, visible background toner can potentially appear on
prints. Use the Developer and Transfer Roller Cleaning procedure to reduce background toner on
prints.
To perform a Developer and Transfer Roller Cleaning procedure:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Developer & Transfer Roller Cleaning.
3. To perform a Developer and Transfer Roller Cleaning procedure, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
PPeerrffoorrmmiinngg aa TTrraannssffeerr BBeelltt CClleeaanniinngg MMooddee PPrroocceedduurree
Debris on the transfer belt can cause vertical black or color-streaks and lines to appear on prints. To
remove black or color-streaks and lines on prints, use the Belt Cleaning Mode procedure.
To perform a Belt Cleaning Mode procedure:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Belt Cleaning Mode.
196
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
Maintenance

Xerox VersaLink C605XT Specifications

General

Brand	Xerox
Model	VersaLink C605XT
Category	All in One Printer
Language	English