• Use the document glass for single pages or paper that cannot be fed using the single-pass
duplex automatic document feeder. Lift the document feeder, then place the original
document face down in the upper-left corner of the document glass.
• For single, multiple, or 2-sided pages, use the single-pass duplex automatic document feeder.
Remove any staples and paper clips from the pages. Insert the original documents face up in
the document feeder, with the top of the page entering the feeder first. Adjust the paper
guides so that they fit against the original documents.
4. Touch Copy, then enter the number of copies needed.
Note: To amend the number of copies entered, touch the Xbutton, then enter the
required quantity.
5. If scanning from 2-sided original documents, touch 2-Sided, then select an option.
6. Adjust copy settings as needed.
For details about available features, refer to Apps Features.
7. Touch Start. If you placed documents in the feeder, scanning continues until the feeder is empty.
8. If you are scanning from the document glass, when prompted, do one of the following:
• To complete the job and return to the Copy app, touch Done.
• To scan another page, load a new original document on the document glass, then touch Add
Page.
• To delete the scan and return to the Copy app, touch Cancel, then touch Delete.
Note: If you are scanning a document from the automatic document feeder, a
prompt does not appear.
9. To return to the home screen, press the Home button.
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
91
Xerox
®
Apps
To Next Page
Loading...
Need help?
General
