Xerox WorkCentre 5330 User Manual

Installation and Setup
WorkCentre 5300 Series Multifunction Printer
User Guide
41
Turning Main Power Off
Main printer power is controlled by the main power switch. Main power should be left on for normal
printer operation and should only be turned off when connecting a cable to the printer or when
cleaning the printer.
CAUTIONS:
• Do not switch the main power off while a job is being processed or while the Power Saver
button is blinking. This may cause damage to the printer's internal hard drive or cause a
printer malfunction.
• Switch the main power off before unplugging the power cord. Unplugging the power
cord with the main power on may damage the printer's internal hard drive or cause a
printer malfunction.
• Do not switch main power off immediately after switching it on. Doing so may damage the
printer’s internal hard drive or cause a printer malfunction.
• Do not switch main power off immediately after switching the power switch off. Doing so
may damage the printer’s internal hard drive or cause a printer malfunction. Wait 10 seconds
after the touch screen goes dark before turning off main power.
1. Make sure the power switch, visible on the lower center tray, is in the off position.
2. Open the front cover.
3. Press the main power switch to the off position.
4. Close the front cover.
wc53xx-015
wc53xx-014

Xerox WorkCentre 5330 Specifications

General

Brand	Xerox
Model	WorkCentre 5330
Category	All in One Printer
Language	English