Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
55
Loading Media
This section includes:
• Loading Paper in Trays 1 and 2 on page 55
• Loading Paper in Trays 3 and 4 on page 57
• Configuring Tray 6 on page 58
• Loading Paper in Tray 6 on page 60
• Loading Paper in Tray 5 (Bypass Tray) on page 60
• Loading Envelopes in Tray 5 (Bypass Tray) on page 62
• Loading Envelopes in the Envelope Tray on page 62
• Printing on Special Media on page 64
Select the appropriate tray depending on the media you plan to use. For details, see Supported Media
on page 51.
Note: In addition to the standard media types, the printer allows up to five custom media
type selections.
For faster printing speeds, load paper 305 mm (12 in.) or shorter for long-edge (LEF). Load paper longer
than 305 mm (12 in.) for short-edge feed (SEF).
Loading Paper in Trays 1 and 2
Tray 1 and Tray 2 accept a maximum of approximately 520 sheets of 80 g/m² paper.
• Tray 1 accepts paper weights from 60 g/m² through 105 g/m².
• Tray 2 accepts paper weights from 60 g/m² through 215 g/m².
To Next Page
Loading...
Need help?
General
