Xerox WorkCentre 5330 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
65
Printing on Labels
Labels can be printed from Trays 2, 3, 4, 5 (Bypass Tray) and 6 (High-Capacity Feeder).
Guidelines
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels.
• Do not use any sheet where labels are missing: it may damage the printer.
• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and
reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions.
Storing them in extreme conditions may cause print quality problems or cause them to jam in
the printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
To print on labels:
1. Load labels in the desired tray.
Note: Load labels face up in Trays 2, 3, and 4. Load labels face down in Trays 5 and 6.
2. In the print driver, do one of the following:
• Select Labels as the paper type.
• Select the tray containing the labels as the paper source.

Xerox WorkCentre 5330 Specifications

General

Brand	Xerox
Model	WorkCentre 5330
Category	All in One Printer
Language	English