Xilinx ZC702 Getting Started Guide

Chapter 1: Introduction
10 www.xilinx.com ZC702 and ZVIK Getting Started Guide
UG926 (v3.0.1) February 12, 2013
Zynq-7000 AP SoC Video and Imaging Kit Contents
The ZVIK contains all of the items included in the ZC702 evaluation kit plus the following
items. For more information on the HDMI input/output FMC module and ON Semiconductor
image sensor, refer to the Avnet product page [Ref 10].
• HDMI input/output FPGA mezzanine card (FMC) module
• ON Semiconductor VITA 2000 Color Image Sensor module
• Standard interchangeable
2
/
3
-inch 8 mm C-mount lens
•Infrared (IR) cut filter
•Camera tripod
• Lens holder
•Cables
°
Second HDMI cable
°
LCEDI image sensor cable
For reference design files, documents, and board source files, go to the ZVIK Product Page
at www.xilinx.com/ZVIK
and click on the Docs & Designs tab.
Key Features of the ZC702 Evaluation Board
Key features of the ZC702 evaluation board include:
• Zynq-7000 XC7Z020-1CLG484 device
• 1 GB DDR3 component memory (four 256 Mb x 8 devices)
• 128 Mb Quad SPI flash memory
• USB 2.0 ULPI (UTMI+ low pin interface) transceiver
• SD MMC connector
• USB JTAG interface through the Digilent USB-to-JTAG programing port
• Clock sources:
°
Fixed user clock—(200 MHz) LVDS oscillator (differential)
°
Programmable user clock—I2C programmable (10 MHz to 810 MHz, with a default
setting of 156.250 MHz) LVDS oscillator (differential)

Xilinx ZC702 Specifications

General

Brand	Xilinx
Model	ZC702
Category	Motherboard
Language	English