XVision H.264 Video Compression High Definition Digital Video Recorder User Manual

26
2-2. Setup – Display Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
DISPLAY icon and press SEL button to enter the setup menu item. Navigate through the menu items using
the control button (◀ ▲ ▶ ▼) and change the value of the menu item using the control button
(◀ ▲ ▶ ▼). To return to setup menu screen, press the ESC button.
Figure 2.2.1. Display mode setup screen
Table 2.2.1. Menu items in DISPLAY mode setup
Item Description
OSD
Enable/disable on-screen-display.
Select ON: show it on the screen, Select OFF: Disappear on the screen.
SEQUENCE Enable/disable sequential display of video in full screen mode.
SEQ-DWELL
TIME
Set the dwell time of each, single channel display in sequential display mode
(3~60seconds)
CHANNEL
Select a channel for applying the following settings using the control button (◀ ▲ ▶
▼). Press SEL button to change the channel.
NAME
Set the channel name. Press SEL button and set the channel name and select OK using
the control button (◀ ▲ ▶ ▼).
COVERT
Enable/disable display of the video channel in live display mode.
VIDEO
OUTPUT
(HDMI/VGA)
Select a video output type for HDMI/VGA. Default value is 1280x720p. If the monitor
doesn’t support some output type, it would be returned to the previous value.

XVision H.264 Video Compression High Definition Digital Video Recorder Specifications

General

Brand	XVision
Model	H.264 Video Compression High Definition Digital Video Recorder
Category	DVR
Language	English