53
When it clicks an Event menu, user can see a calendar which has recording data. Select a specific date
and then user can see all data. Press a PLAY button to playback the data or a SAVE button to save the
data at once after selecting a specific data. User can find a data of the specific channel and event using a
button in the above red box. Press the PREV to return to the SEARCH window.
4-2-3. Go To First Time
You can access from the oldest recorded data on the DVR hard drive by selecting GO TO FIRST TIME
on the SEARCH window. Press the PREV to return to the SEARCH window.
4-2-4. Go To Last Time
You can access from the last minute recorded data on the DVR hard drive by selecting GO TO LAST
TME on the SEARCH window. Press the PREV to return to the SEARCH window.
4-2-5. Go To Specific Time
Figure 4.2.3. Go To Specific Time
User can search for video data from a specific instance by setting the date and time in the Go To
Specific Time menu. Use the mouse or the control button (
◀ ▲ ▶ ▼
) on the remote control to change
the date and time value and press the PLAY button after setting. If there are no the video data in the set
To Next Page
Loading...
Need help?
General
