46
③ SERVER3
Auto DDNS. This is an easy auto DDNS setup feature. If selected, the DVR will automatically register itself with okddns.com. This
feature will setup DDNS automatically for you. In addition, unlike in Server1 option, this option will provide you with DVR health
checking and additional features such as UPnP, at no cost to you.
Figure 2.8.4. Network setup screen – DDNS Server 3
- How to use Server 3
1. You can input your hostname what you want and select ‘OK’ in order to register and checking the success status as below picture.
If you failed auto register then status will show a ‘Not Registered MAC’ message.
2. If you don’t want to put the hostname, select ‘AUTO’ and ‘OK’. MAC address appear when you selected ‘AUTO’ and this MAC address be a host
name.
3. If you want to change the host name, input the hostname and ‘OK’
2-8-4. NETWORK STREAM
User can set the Resolution, the frame rate and the quality for a network stream classified by channel.
It is recommended that user should adjust each item to proper level to get the network service smoothly.
Figure 2.8.4. Network setup screen – Network Stream
To Next Page
Loading...
Need help?
General
