Xylem wtw Multi 3410 User Manual

Multi 3410 What to do if...
114
ba75863y18 01/2015
Error message,
Error
6.4 Conductivity
Error message,
OFL
Error message,
Error
Cause Remedy
– Sensor contaminated – Clean the sensor
– Measured temperature outside
the operating conditions
(OFL/UFL displayed instead of
temperature value)
– Observe the temperature
range for the measuring
medium
– Defective sensor – Replace sensor
Note
More information, as well as notes on cleaning and replacement of
sensors, are given in the documentation of your sensor.
Cause Remedy
– Measured value outside the
measuring range
– Use suitable IDS conductiv-
ity sensor
Cause Remedy
– Sensor contaminated – Clean sensor and replace it
if necessary
– Calibration solution not suitable – Check calibration solutions
Note
More information, as well as notes on cleaning and replacement of
sensors, are given in the documentation of your sensor.

Xylem wtw Multi 3410 Specifications

General

Brand	Xylem
Model	wtw Multi 3410
Category	Measuring Instruments
Language	English