Xylem wtw Multi 3410 User Manual

Operation Multi 3410
61
ba75863y18 01/2015
4.7.3 Settings for ORP measurements
Overview The following settings are possible for ORP measurements:
 Resolution
 Automatic stability control
Settings The settings are made in the menu for measuring settings of the ORP
measurement. To open the settings, display the required parameter in
the measured value display and press the <MENU/ENTER> key. After
completing the settings, switch to the measured value display with
<M>.
Default settings are printed in bold.
Menu item Possible set-
ting
Description
mV resolution 0.1
1
Resolution of the mV dis-
play
Reset - Resets all sensor settings to
the delivery condition (see
section 4.14.1)

Xylem wtw Multi 3410 Specifications

General

Brand	Xylem
Model	wtw Multi 3410
Category	Measuring Instruments
Language	English