VX-6R/E OPERATING MANUAL 39
HOME CHANNEL MEMORY
A special one-touch “HOME” channel is available for each of operating bands, to allow
quick recall of a favorite operating frequency on each band.
Home Channel storage is simple to accomplish:
1. Change the setting of Set Mode Item 28: HM/RV from “REV” to “HOME,” if it is not
already set to this option (see page 95).
2. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
3. Press and hold in the
[
F/W
]
key for one second.
4. While the memory channel number is blinking, just press the
[
HM/RV
(
EMG
)
R/H
]
key.
The frequency and other data (if any) will now be stored in the special HOME channel
register.
5. You may repeat this process on the other operating bands.
6. To recall the HOME channel, press the
[
HM/RV
(
EMG
)
R/H
]
key momentarily while operating either in
the VFO or MR mode.
The UHF HOME
channel is the one
used during “Emer-
gency Channel Operation.” See
page 62 for details regarding
this feature.
MEMORY MODE
(
REGULAR MEMORY CHANNEL
)
BAND
DEF AUL T HOME CHANNEL FREQUENCY
USA VERSION EXP/EU VERSION
BC Band 0.540 MHz 0.540 MHz
SW Band 1.800 MHz 1.800 MHz
50 MHz Ham Band 30.000 MHz 30.000 MHz
FM BC Band 59.000 MHz 88.000 MHz
Air Band 108.000 MHz 108.000 MHz
144 MHz Ham Band 146.520 MHz 144.000 MHz
VHF-TV Band 174.000 MHz 174.000 MHz
222 MHz Ham Band 222.000 MHz 230.000 MHz
430 MHz Ham Band 446.000 MHz 430.000 MHz
UHF-TV Band 470.000 MHz 470.000 MHz
Information Band 860.000 MHz 860.000 MHz
To Next Page
Loading...
Need help?
General
