Yamaha 2001 V Star XVS650A User Manual

1
1-1
EAU03633
1-
SAFETY INFORMATION
MOTORCYCLES ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE
DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE
OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS
BEFORE RIDING THIS MOTORCYCLE.
HE OR SHE SHOULD:
1. OBTAIN THOROUGH INSTRUCTIONS FROM A COMPETENT SOURCE ON ALL ASPECTS OF
MOTORCYCLE OPERATION.
2. OBSERVE THE WARNINGS AND MAINTENANCE REQUIREMENTS IN THE OWNER’S MANUAL.
3. OBTAIN QUALIFIED TRAINING IN SAFE AND PROPER RIDING TECHNIQUES.
4. OBTAIN PROFESSIONAL TECHNICAL SERVICE AS INDICATED BY THE OWNER’S MANUAL
AND/OR WHEN MADE NECESSARY BY MECHANICAL CONDITIONS.
Safe riding
1. Always make pre-operation checks. Careful checks may help prevent an accident.
2. This motorcycle is designed to carry the operator and a passenger.
3. The failure of motorists to detect and recognize motorcycles in traffic is the predominating cause of
automobile/motorcycle accidents. Many accidents have been caused by an automobile driver who
did not see the motorcycle. Making yourself conspicuous appears to be very effective in reducing the
chance of this type of accident.
Therefore:
a. Wear a brightly colored jacket.
b. Use extra caution when approaching and passing through intersections, since intersections are
the most likely places for motorcycle accidents to occur.
c. Ride where other motorists can see you. Avoid riding in another motorist’s blind spot.
E_5bn.book Page 1 Monday, November 13, 2000 9:11 AM

Yamaha 2001 V Star XVS650A Specifications

General

Brand	Yamaha
Model	2001 V Star XVS650A
Category	Motorcycle
Language	English

Summary

Safety Information

Safe Riding Practices

Essential guidelines for safe motorcycle operation and rider awareness.

Protective Apparel Recommendations

Recommendations for protective gear to minimize injury risk in accidents.

Instrument and Control Functions

Handlebar Control Switches

Clutch and Brake Controls

Operation of the clutch lever, shift pedals, brake lever, and brake pedal.

Pre-Operation Checks

Pre-Operation Checklist

A comprehensive list of checks to perform before riding for safety and maintenance.

Operation and Riding Points

Starting and Warming Up Engines

Procedures for starting cold and warm engines, including necessary conditions.

Gear Shifting Techniques

Periodic Maintenance and Minor Repair

Periodic Maintenance and Lubrication Chart

Schedule and tasks for regular maintenance and lubrication based on mileage or time.

Engine Oil and Filter Replacement

Steps for checking, changing engine oil, and replacing the oil filter element.

Tire Checks and Specifications

Guidelines for checking tire condition, pressure, and approved tire specifications.

Brake System Maintenance

Procedures for checking brake pads, shoes, fluid level, and changing brake fluid.

Troubleshooting Guide

A chart to help diagnose and resolve common operational problems with the motorcycle.

Specifications

General Motorcycle Specifications