PERIODIC MAINTENANCE AND MINOR REPAIR
6-33
6
EC000105
CAUTION:
@
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
@
5. Install the bulb cover, and then
connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU00855
Replacing a turn signal light
bulb or the tail/brake light
bulb
1. Remove the lens by removing the
screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
EC000108
@
Do not overtighten the screws, oth-
erwise the lens may break.
@
1. Screw (× 2) 1. Screw (× 2)
E_5bn.book Page 33 Monday, November 13, 2000 9:11 AM
To Next Page
Loading...
Need help?
General
