3-8
GB
EMF40012
PRE-OPERATION CHECKS
w
If any item in the pre-operation check is
not working properly, have it inspected
and repaired before operating the out-
board motor. Otherwise, an accident
could occur.
EMF41110
Fuel
8 Check to be sure you have plenty of fuel
for your trip.
8 Make sure there are no fuel leaks or
gasoline fumes.
8 Check fuel line connections to be sure
they are tight.
8 Be sure the fuel tank is positioned on a
secure, flat surface, and that the fuel
hose is not twisted or flattened, or likely
to contact sharp objects.
EMF43010
Controls
8 Check throttle, shift, and steering for
proper operation before starting the
engine.
8 The controls should work smoothly,
without binding or unusual free play.
8 Look for loose or damaged connec-
tions.
8 Check operation of the starter and stop
switches when the outboard motor is in
the water.
EMF42110
Oil
8 Check to be sure you have plenty of oil
for your trip.
63B-9-78-A0-3a 2/17/03 4:35 PM Page 20
To Next Page
Loading...
