COMMAND Pages
103
Chapter 4 PLAY Mode
Chapter 4
PGMDUMP (Program Dump)
Transmits a bulk dump of the selected program.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Press the COMMAND key, then turn Knob 1 to select >PGMDUMP.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔✔ -
Push action ✔ ----
Use this page to dump the selected memory-resident program to an external MIDI de-
vice. The dump operation transmits all of the program’s data to the external device.
Important
Before you can transmit or receive a program dump, you must set matching device-
number values at the A3000 and the external device. (☞310)
Knob 1 Change Page >PGMDUMP
• Turn the knob to change to a different command page.
• Push the knob to execute the program dump. The A3000 returns a confirmation
screen. Push Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel.
Knobs 2, 3
Program = 001,...,128
Turn either knob to select the program that you want to dump.
Knob 4 withRelated = off, on
Use this setting to select whether to include the program’s samples in the dump.
• If you select off, the A3000 transmits program data only.
• If you select on, the A3000 transmits the program data together with all data from all
samples used by the program. (Sample data is transmitted in A3000 proprietary for-
mat.)
To Next Page
Need help?
General
