Yamaha CP1 User Manual

Turning on the CP1
CP1 Owner’s Manual
13
Setting Up
Turning on the CP1
1 After you have made all of the required connections as described above, ensure that the [MASTER VOLUME] dial on
the left of the CP1 control panel and the volume of any connected keyboard amplifiers or powered speakers are fully
turned down (to MIN or 0), and also ensure that all equipment is turned off.
2 Press the [P] (power) switch on the stage piano’s rear panel.
3 Turn on any keyboard amplifiers or powered speakers connected to the CP1.
When turning off the stage piano, start by turning fully down the [MASTER VOLUME] dial on the control panel and the
volume of any connected keyboard amplifiers or powered speakers (to MIN or 0); then turn off the amplifiers or speakers;
and finally, press the [P] (power) switch on the rear panel.
TIP
If the CP1 is turned on with a USB flash-memory device already plugged in, it will either create an External Performance memory
on the device (see page 22) or read External Performance data already present on the device into the instrument’s DRAM (see
page 39) before displaying the main Performance screen. For more details, see page 19 from the section, Internal Design of the
CP1.
12
POWER
ON!

Yamaha CP1 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Keyboard number of keys	88
Maximum polyphony (notes)	128
Reverberation effects quantity	8
Display number of lines	2 lines
Display number of characters	55
Power source type	AC

Weight and Dimensions

Depth	420 mm
Width	1385 mm
Height	173 mm
Weight	27200 g