E
4-5
EMU00335
Filling Fuel Tank
Fill the fuel tank with fresh fuel and add
one ounce of “Yamaha Fuel Conditioner
and Stabilizer” (Part No. LUB-FUELC-12-
00) to each gallon of fuel.
NOTE:
The use of “Yamaha Fuel Conditioner and
Stabilizer” eliminates the need to drain
the fuel system. Consult your Yamaha
dealer or other qualified mechanic if the
fuel system is to be drained instead.
EMU00338
Flushing Cooling System and Fogging
Engine
Cooling system flushing is essential to
prevent the cooling system from clogging
up with salt, sand, or dirt. In addition, fog-
ging of the engine is mandatory to pre-
vent expensive engine damage due to
rust. Perform the flushing and fogging at
the same time.
w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
EMU00342
8 Flushing with the Flushing Attachment
cC
Avoid running the outboard at high
speed while on the flushing attachment,
or overheating could occur.
1) Remove the top cowling and the pro-
peller.
2) Install a flushing attachment 1 to the
cooling water inlet.
605014
68V-9-13-4 3/15/02 1:59 PM Page 6
To Next Page
Loading...
Need help?
General
