Yamaha F250 User Manual

General information
10
EMU41571
Key number
The key identification number is stamped on
the spare key as shown in the illustration.
Keep the spare key in a safe place and re-
cord this number in the space provided for
reference in case that you need a new key.
EMU38981
EC Declaration of Conformity
(DoC)
This declaration is included with outboard
motors that conform to European regula-
tions.
This outboard motor conforms to certain por-
tions of the European Parliament directive
relating to machinery.
Each conformed outboard motor accompa-
nied with EC DoC.EC DoC contains the fol-
lowing information;

Name of Engine Manufacture

Model name
 Product code of model (Approved model
code)

Code of conformed directives
EMU38994
CE Marking
This label is affixed to outboard motors that
conform to European regulations.
Outboard motors affixed with this “CE” mark-
ing conform with the directives of;
2006/42/EC, 94/25/EC - 2003/44/EC and
2004/108/EC.
1. Serial number
2. Type
3. Approved model code
1. Key number
231
ZMU05917
1
ZMU07133
1. CE marking location
1
ZMU08044
6CE-9-36-1E0.book 10 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha F250 Specifications

General

Prop Shaft Horsepower	250 hp
Full Throttle RPM Range	5000 - 6000 rpm
Gear Ratio	1.75:1
Starting System	Electric
Displacement	4169cc
Bore x Stroke	96 x 96 mm
Fuel Induction System	EFI (Electronic Fuel Injection)
Ignition System	TCI (Transistor Controlled Ignition)
Alternator Output	50 amps
Steering	Remote
Shaft Length	25 in
Weight	253 kg (557 lbs) - F250XCA
Recommended Fuel	Regular Unleaded (Minimum Octane 87)