Yamaha F250 User Manual

Components
40
NOTICE
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.
EMU40762
Cowling lock lever
The cowling lock levers are used to secure
the top cowling.
EMU40803
Flushing device
The flushing device is used to clean the cool-
ing water passages of the outboard motor
using a garden hose and tap water. For in-
structions on using the flushing device, see
page 78.
EMU40823
Fuel filter
The fuel filter functions to remove foreign
material and separate water from the fuel. If
water separated from the fuel exceeds a
specific volume, the alert system will acti-
vate. For further information, see page 55.
1. Cowling lock lever
1. Cowling lock lever(s)
1
ZMU06909
1
ZMU06910
1. Flushing device
1
ZMU07154
6CE-9-36-1E0.book 40 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha F250 Specifications

General

Prop Shaft Horsepower	250 hp
Full Throttle RPM Range	5000 - 6000 rpm
Gear Ratio	1.75:1
Starting System	Electric
Displacement	4169cc
Bore x Stroke	96 x 96 mm
Fuel Induction System	EFI (Electronic Fuel Injection)
Ignition System	TCI (Transistor Controlled Ignition)
Alternator Output	50 amps
Steering	Remote
Shaft Length	25 in
Weight	253 kg (557 lbs) - F250XCA
Recommended Fuel	Regular Unleaded (Minimum Octane 87)