Instruments and indicators
43
engines are under engine synchronization
control. It goes off when engine synchroniza-
tion control is released.
EMU41681
Overheat alert
If the engine temperature rises too high while
cruising, the pop-up window will appear.
Press the “ ” (set) button to change to nor-
mal display, and the overheat-alert indicator
will start to blink. The engine speed will auto-
matically decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01593
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU41691
Low oil pressure-alert
If the engine oil pressure drops too low, the
pop-up window will appear. Press the “ ”
(set) button to change to normal display, and
the low oil pressure-alert indicator will start to
blink. The engine speed will automatically
decrease to about 2000 r/min.
6CE-9-36-1E0.book 43 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
Need help?
General
