Yamaha MT-09 SP User Manual

Instrument and control functions
6-1
6
EAU6605A
Handlebar switches
Left
Right
EAUA2611
Dimmer/Pass switch “ / ”
Push this switch outward (direction A)
to turn the high beam on. Push this
switch inward (direction B) to return to
low beam.
While the headlights are set to low
beam, push the switch inwards (direc-
tion B) to momentarily flash the high
beam.
In TRACK theme: This switch is addi-
tionally used to operate the lap timer.
While the headlights are on low beam,
and the switch is pushed inwards (di-
rection B), the lap timer will start/count
a lap. In this case the high beam will
not flash.
1. Cruise control power button “ ”
2. Cruise control setting switch “RES/+/SET/–”
3. Dimmer/Pass switch “ / ”
4. Joystick “ ”
5. Turn signal switch “ / ”
6. Horn switch “ ”
7. Home button “ ”
8. Hazard switch “ ”
5
4
6
8
7
1
2
3
5
4
6
8
7
1
2
3
1. Stop/Run/Start switch “ / / ”
2. YRC mode button “MODE”
1. Dimmer/Pass switch “ / ”
2. Direction A
3. Direction B
1
22
1
2
33
UBMME0E0.book Page 1 Tuesday, March 12, 2024 2:37 PM

Yamaha MT-09 SP Specifications

General

Displacement	889cc
Bore x Stroke	78.0 mm x 62.1 mm
Compression Ratio	11.5:1
Maximum Torque	93.0 Nm (9.5 kg-m) @ 7, 000 rpm
Fuel System	Fuel Injection
Starter System	Electric
Transmission	6-speed
Final Drive	Chain
Length	2, 090 mm
Height	1, 190 mm
Seat Height	825 mm
Wheelbase	1, 430 mm
Ground Clearance	140 mm
Wet Weight	193 kg
Fuel Tank Capacity	14 L
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve
Maximum Power	119 PS (87.5 kW) @ 10, 000 rpm
Front Brakes	Hydraulic dual disc, 298 mm
Rear Brakes	Hydraulic single disc, 245 mm
Front Tire	120/70ZR17
Rear Tire	180/55ZR17