EasyManuals Logo
Home>Yamaha>Receiver>RX-V681

Yamaha RX-V681 User Manual

Yamaha RX-V681
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
En 40
4 Connecting a network cable or preparing the wireless antenna
Connect the unit to a router (access point) with a network cable, or prepare the wireless
antenna for establishing a wireless network connection.
You can enjoy Internet radio or music files stored on media servers, such as PCs and Network
Attached Storage (NAS), on the unit.
Connecting the network cable
Connect the unit to your router with a commercially-available STP network cable (CAT-5 or
higher straight cable).
X
If you want to use a wired (network cable) connection when a wireless connection has been made, set “Network
Connection” (p.119) in the “Setup” menu to “Wired”.
If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as
the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure
the network settings if your router does not support DHCP or if you want to configure the network parameters
manually (p.119).
You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Network” (p.127) in the “Information” menu.
Y
Some security software installed on your PC or the firewall settings of network devices (such as a router) may
block the access of the unit to the network devices or the Internet. In these cases, configure the security
software or firewall settings appropriately.
Each server must be connected to the same subnet as the unit.
To use the service via the Internet, broadband connection is strongly recommended.
Preparing the wireless antenna
If you want to establish a wireless network connection, stand the wireless antenna up straight.
For information on how to connect the unit to a network device wirelessly, see “Connecting to
a network device wirelessly” (p.53).
Y
Do not apply excessive force on the antenna. Doing so may damage it.
CLASS 2 WIRING CABLAGECLASSE 2
SPEAKERS
NETWORK
(
NET
)
F.PRESENCE/ZONE2
EXTRA SP1
EXTRA SP2
WIRELESS
LAN
WAN
Network Attached Storage
(NAS)
Internet
Modem
Router
Network cable
PC
The unit (rear)
Mobile device
WIRELESS

Table of Contents

Other manuals for Yamaha RX-V681

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha RX-V681 and is the answer not in the manual?

Yamaha RX-V681 Specifications

General IconGeneral
Receiver typeSurround
Frequency range20 - 20000 Hz
4Ω speaker supportYes
Audio output channels7.2 channels
Total Harmonic Distortion (THD)0.06 %
Dynamic power per channel (4 Ohm)190 W
Dynamic power per channel (8 Ohm)125 W
Power output per channel (20-20KHz@8 Ohm)150 W
HDMI in6
Audio (L/R) in5
Remote (IR) input1
Composite video in4
Component video (YPbPr/YCbCr) in2
Audio (L/R) out0
Headphone connectivity3.5 mm
Product colorSilver
Audio decodersDTS Neo:X, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD
Apple docking compatibility-
Banana connector14
Connectivity technologyWired & Wireless
Speakers connectivity typeBanana connector/Binding posts
Supported radio bandsAM, FM
Optical drive includedNo
Supported video modes2160p
Power consumption (standby)0.1 W
Weight and Dimensions IconWeight and Dimensions
Depth378 mm
Width435 mm
Height171 mm
Weight10000 g

Related product manuals