En 97
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This menu is
available on the front panel (or on the TV screen), allowing you to easily configure settings
during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
X
To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option menu items
X
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
• Default settings are underlined.
Item Function Page
Tone Control
(Tone Control)
Adjusts the level of high-frequency range and
low-frequency range individually.
98
YPAO Volume
(YPAO Volume)
YPAO Volume
(YPAO Vol.)
Enables/disables YPAO Volume. 98
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume is
adjusted.
98
Dialogue
(Dialog)
Dialogue Level
(Dialog Lvl)
Adjusts the volume of dialogue sounds. 98
DTS Dialogue
Control
(DTS Dialog)
Adjusts the volume of dialogue sounds for DTS:X
contents.
98
Dialogue Lift
(Dialog Lift)
Adjusts the perceived height of dialogue sounds. 99
Lipsync Adjustment
(Lipsync Adj.)
Adjusts the delay between video and audio output. 99
Subwoofer/Bass
(Subwoofer/Bass)
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. 99
Extra Bass
(Extra Bass)
Enables/disables Extra Bass. 99
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 99
Video Processing
(Video Process.)
Enables/disables the video signal processing settings
configured in the “Setup” menu.
100
Input Settings
(Input Settings)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 100
Video Out
(V.Out)
Selects a video to be output with the audio input source. 100
FM Mode
(FM Mode)
Switches between stereo and monaural for FM radio
reception.
100
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information station.
72
Shuffle
(Shuffle)
Configures the shuffle setting for the USB storage device
(p.78) or media server (p.82).
⏤
Repeat
(Repeat)
Configures the repeat setting for the USB storage device
(p.78) or media server (p.82).
⏤
To Next Page
Loading...
Need help?
General
Weight and Dimensions
