Yamaha RX-V681 User Manual

En 42
6 Connecting the power cable
Before connecting the power cable (Taiwan, Brazil and General models only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are
AC 110–120/220–240 V, 50/60 Hz.
Y
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet.
Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard.
After all the connections are complete, plug in the power cable.
N
T
SINGLE
SURROUND BACK
ZONE2/BI-AMP
F.PRESENCE/ZONE2
EXTRA SP1
EXTRA SP2
220V
-
240V
110V
-
120V
VOLTAGE SELECTOR
The unit (rear)
VOLTAGE SELECTOR
CENTER
WIRING CABLAGE CLASSE 2
FRONT
SINGLE
SURROUND BACK
ZONE2/BI-AMP
SPEAKERS
NETWORK
(
NET
)
F.PRESENCE/ZONE2
EXTRA SP1
EXTRA SP2
To an AC wall outlet
The unit (rear)

Yamaha RX-V681 Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
4Ω speaker support	Yes
Audio output channels	7.2 channels
Total Harmonic Distortion (THD)	0.06 %
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	150 W
HDMI in	6
Audio (L/R) in	5
Remote (IR) input	1
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Audio (L/R) out	0
Headphone connectivity	3.5 mm
Product color	Silver
Audio decoders	DTS Neo:X, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD
Apple docking compatibility	-
Banana connector	14
Connectivity technology	Wired & Wireless
Speakers connectivity type	Banana connector/Binding posts
Supported radio bands	AM, FM
Optical drive included	No
Supported video modes	2160p
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	378 mm
Width	435 mm
Height	171 mm
Weight	10000 g