Yara N-Sensor User Manual

Yara N-Sensor V3.10 Operation Manual
2.5 Main menu
Generally, to work with the N-Sensor, you only need to go through the main menu bar
from top to bottom:
The Setup menu makes some general settings to the spreader or sprayer, the N-
Sensor, the GPS receiver and the program itself (see section
3). Normally, you will
rarely enter this menu after you have made your initial settings. In contrast, the Select
tasks menu (see section
4) and the Agronomic calibration. menu (see section 5) have to
be entered once every time a new field is started. Finally, the Start/Stop button will be
used several times within the field to activate and deactivate the N-Sensor.
The following sections will guide through the menus and the relevant settings. If the ini-
tial setting have already been made, you can skip the following section and continue
with the Task menu in section
4.
Last revised: 28.01.2009 14:39 Page 15 of 64

Yara N-Sensor Specifications

General

Brand	Yara
Model	N-Sensor
Category	Measuring Instruments
Language	English