Yara N-Sensor User Manual

Yara N-Sensor V3.10 Operation Manual
wise, the N-Sensor recommendation is used. In this case, there is no difference
to the Sensor (standard) setting.
4. Application map: The final application rate is the rate from the prescription map,
if the map is available and the vehicle is inside the map area. Otherwise, the
uniform rate (entered in the agronomic calibration menu) will be applied.
One of the last three options has to be selected to make use of raster maps.
6.2 Linking raster maps to tasks
As a next step, the raster maps need to be linked to the task by clicking the button
next to the Raster map entry in the Tasks menu. Note that the Raster map option is only
available if the Application mode has been properly set (see section
6.1).
The full path and the name of the file can then be selected. Alternatively, raster maps
can be linked to the task when preparing N-Sensor operations through the CardWriter
software.
The selected map can then be displayed by clicking the Map tab at the bottom of the
page:
Last revised: 28.01.2009 14:39 Page 53 of 64

Yara N-Sensor Specifications

General

Brand	Yara
Model	N-Sensor
Category	Measuring Instruments
Language	English