Yealink CP920 Instruction Manual

Yealink CP920 User Guide
20
Deactivating DND
You can deactivate DND when you are ready to resume receiving calls again.
Procedure
1. Tap DND when the phone is idle.
The DND icon disappears from the status bar.
Ending Calls
You can end the current call at any time.
Procedure
1.
Tap End Call or .
Redialing a Call Automatically
You can set the phone to redial a phone number automatically when you call a contact and the contact’s line is unavail-
able.
Procedure
1. Navigate to Menu > Features > Auto Redial.
2. Select Enabled from the Auto Redial field.
3. Enter the desired time (between 1 and 300 seconds) in the Redial Interval field.
4. Enter the desired times (between 1 and 300) in the Redial Times field.
5. Select Save.
When you dial a number but fail to establish a call, the phone prompts whether to auto redial the contact, select OK to
activate auto redial.
The phone screen displays the redial times and interval. The phone will retry as many times as configured until the
callee answers the call.

Yealink CP920 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Certification	CE
Product color	Stainless steel
Built-in display	Yes
Display diagonal	3.1 \
Display resolution	248 x 120 pixels
Phonebook capacity	1000 entries
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
AC input voltage	100 - 240 V
USB version	2.0
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	298 mm
Width	307.8 mm
Height	66.9 mm
Package depth	364 mm
Package width	336 mm
Package height	112 mm