EasyManuals Logo

Yealink CP920 Instruction Manual

Yealink CP920
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Yealink CP920 User Guide
28
Setting Up a Network Conference
Setting Up a Network Conference
You can set up a network conference with two or more contacts.
Procedure
1. Place a call to the first party.
2. Select Conference.
The active call is placed on hold.
3. Dial the second party’s number.
4. When the second party answers the call, select Conference to add the second party to the conference.
5. Select Conference to place a new call.
The conference call is placed on hold.
6. Enter the number of the new party, and then tap the OK key or Send.
7. When the new party answers the call, select Conference to add the new party to the conference.
8. Repeat steps 5 to 7 until you add all parties.
Note
The procedures for setting up a network conference call on specific servers may be different. Contact your system admin-
istrator for more information.
Recording Using a USB Flash Drive
You can record active calls onto a USB flash drive connected to your phones, and the recordings are saved as *.wav
files.
Recording using a USB flash drive is not available by default. Contact your system administrator for enabling this fea-
ture for you.
Note
The size of a single recording file should be less than 2G.
Topics
Recording a Call
Idle Recording
Pausing/Resuming a Recording
Stopping a Recording
Listening to a Recording
Managing the Recordings
Viewing the Available Recording Time
Recording a Call
You can record the important parts during an active call.
Important
Before call recording, especially those involving PSTN, it is necessary to know about the rules and restrictions of call record-
ing in the country where you are.
It is also very important to inform all the call parties that you are recording and ask for their consent before recording the
conversation.

Table of Contents

Other manuals for Yealink CP920

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink CP920 and is the answer not in the manual?

Yealink CP920 Specifications

General IconGeneral
Control typeButtons
Display typeLCD
Product typeIP conference phone
Voice codecsCNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
CertificationCE
Product colorStainless steel
Built-in displayYes
Display diagonal3.1 \
Display resolution248 x 120 pixels
Phonebook capacity1000 entries
Security algorithmsHTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Microphone direction typeOmnidirectional
AC input voltage100 - 240 V
USB version2.0
Storage temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth298 mm
Width307.8 mm
Height66.9 mm
Package depth364 mm
Package width336 mm
Package height112 mm

Related product manuals