Yealink MeetingEye 800 User Manual

| Using WPP20 Wireless Presentation Pod | 44
Receiving Shared Whiteboard or Content
WPP20 can receive whiteboard or content shared by the VCS codec or other devices. If the administrator
needs to confirm the authentication before setting the WPP20 to obtain the collaboration data, click
Verification > Acquiring code on the Yealink Wireless Presentation Pod software. Enter the four-digit
authentication code in the security check box. The authentication code is displayed in the upper right
corner of the display device connected to the VCS codec.
You can use the WPP20 annotation tool or the whiteboard annotation tool to take notes.
Related information
Introduction of WPP20 Note Toolbar
Introduction of the WPP20 Whiteboard Note Toolbar

Yealink MeetingEye 800 Specifications

General

Brand	Yealink
Model	MeetingEye 800
Category	Conference System
Language	English