Yealink SIP-T27P User Manual

Basic Call Features
115
Press or to select the desired forwarding type and then press the Enter soft key.
Press or , or the Switch soft key to select Disabled to deactivate the call forward.
Press the Save soft key to accept the change.
To deactivate call forward in custom mode:
1. Press Menu->Features->Call Forward or press when the phone is idle.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or to select the desired forwarding type and then press the Enter soft key.
4. Press or , or the Switch soft key to select Disabled to deactivate the call forward.
If you want to deactivate call forward for all accounts, press the All Lines soft key.
5. Press the Save soft key to accept the change.
Dynamic Forwarding
You can manually forward a call to another number while your phone rings
To forward an incoming call to another party:
1. When the phone is ringing, press the Forward soft key.
2. Enter the number you want to forward the incoming call to.
3. Press , , or the Send soft key.
The LCD screen prompts a call forward message.
Call Transfer
You can transfer a call to another party during a call in one of three ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.
Allow Trans Exist Call
You can also transfer a call to another existing call during multiple calls.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm