Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone
118
 Enter the number you want to transfer the call to.
Press or the Transfer soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the
handset.
 Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page 42 for more information).
Press , or the Send soft key to complete the transfer.
 Press the Directory soft key, and then select History. Select the desired list and
then press or to select the entry (Directory should be configured in
advance. Refer to Directory on page 42 for more information).
Press , or the Send soft key to complete the transfer.
 Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to Directory on page 42 and Remote Phone Book on page 55 for
more information).
Press , or the Send soft key to complete the transfer.
Semi-attended Transfer
Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode on DSS key is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode on DSS Key on page
142.
To perform a semi-attended transfer:
1. Press or the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press or to dial out.
- Press the Directory soft key, and then select Local Directory. Select the desired

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm