Yealink SIP-T27P User Manual

Advanced Phone Features
171
The phone will dial out “*11” automatically when you press the Call Pull soft key.
Using SCA Feature on the IP Phone
This section provides you with detailed information on using the SIP-T27P IP phone in a SCA
Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line key LED
which associates with a shared line will change. For more information on line key LED indicators,
refer to LED Instructions on page 5.
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
 Placing calls
 Answering calls
 Placing a call on hold
 Retrieving a held call
 Barging in an active call
 Call Pull
Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Do one of following:
- Enter the desired number using the keypad when the phone is idle. Press , , or
the Send soft key.
The phone will dial the entered number using the first line key.
- Press the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad and then press , , or the Send soft
key.
The phone will dial the entered number using the selected line key.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on the line key 1 of phone A, do one of the following on phone A:
- Press or the Hold soft key. The original call is placed on hold.
Press the New Call soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Phone A will dial the entered number using the line key 2 automatically.
- Press the line key. The original call is placed on hold.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm