User Guide for the SIP-T27P IP Phone
122
account.
During the conference call, you can do the following actions:
- Press or the Hold soft key to place the conference on hold.
- Press the Split soft key to split the conference call into two individual calls on hold.
- Press the Manage soft key, and then press or to select the desired party:
Press the Far Mute soft key to mute the party. The muted party can hear everyone,
but no one can hear the muted party.
Press the Remove soft key to remove the party from the conference call.
Press the New Call soft key to place a new call.
Press the Back soft key to return to the previous screen.
- Press to mute the conference call, all other participants can hear each other, but they
cannot hear you.
- Press the End Call soft key to drop the conference call.
Network Conference
You can use network conference feature on the SIP-T27P IP phone to conduct a conference with
multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.
Invite another party into an active conference call.
To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Network Conference from the pull-down list of Conference Type.