EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Configuration Guide

Yealink SIP-T41S
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 65 OF 150
Figure 36 Device Profile Instance
5.2.4 Configure BroadWorks User
Configure the user with the desired BroadWorks configuration and services. Any services
that require a specific configuration on the device are managed via Device Management
and are defined in the device configuration files, if the template files are created with the
correct Device Management tags.
The device profile created in the previous section must be assigned to the BroadWorks
user. Assigning the device profile to the user automatically causes the Device
Management feature to generate the device configuration files for this user’s device.
To assign the device profile to the user, browse to the BroadWorks <user> Addresses.
Customize Tags
This section identifies custom tags used by the Yealink T4x that may need to be
customized at the group or device profile. Customizing a tag at the group level overrides
the setting on the device profile type for the device profiles created within the group.
Customizing a tag at the device profile level overrides the setting at the device profile type
and/or group level for the individual device profile.
5.2.4.1 SBC Address Customization for Edge Device
In many deployments, an edge device, such as an enterprise SBC or application layer
gateway, is deployed on the enterprise edge. The edge device’s SIP server or outbound
proxy setting is configured with the service provider’s SBC IP address or FQDN. If there is
no edge device, the following customization does not apply.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals