Yealink SIP-T41S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 76 OF 150
Appendix A: Reference T4x Configuration Files
The following is a reference configuration for the T48G configured for use with
BroadWorks.
NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT
AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the
configuration files obtained from Yealink with the specific release to generate your configuration files.
System Default File: y000000000054.cfg
NOTE: This is an example file and it should be used for reference only.
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must
be placed in the first line.##
##This template file is applicable to SIP-
T21_E2P/T19_E2P/T23P/T40P/T27P/T29G/T46G/T48G/T42G/T41P/T48S/T46S/T42S/T41
S/T27G/T61/T66 IP phones running firmware version 72 or later.##
##For more information on configuration parameters, refer to Yealink_SIP-
T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.##
##########################################################################
#############
## Hostname
##
##########################################################################
#############
static.network.dhcp_host_name =
##########################################################################
#############
## Network Advanced
##
##########################################################################
#############
##It enables or disables the PC port.0-Disabled,1-Auto Negotiation.
##The default value is 1.It takes effect after a reboot.
static.network.pc_port.enable =
##It configures the transmission mode and speed of the Internet (WAN)
port.
##0-Auto Negotiate
##1-Full Duplex 10Mbps
##2-Full Duplex 100Mbps
##3-Half Duplex 10Mbps
##4-Half Duplex 100Mbps
##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP
phones)
##The default value is 0.It takes effect after a reboot.
static.network.internet_port.speed_duplex =
##It configures the transmission mode and speed of the PC (LAN) port.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm