EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Configuration Guide

Yealink SIP-T41S
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 69 OF 150
Device Management must be configured to facilitate the No Touch Provisioning method.
Configuration can be performed using the Device Management import function or done
manually. Each method is described in the following subsections
5.2.5.2.1 Configuration Method 1: Import
This section identifies the steps necessary to make use of the Device Management import
feature to configure BroadWorks to add the Device Management Defaults device type for
No Touch Provisioning.
The import method is available in BroadWorks Release 17.0 and later. For previous
releases, use the manual configuration method described in the next section.
Download the Yealink T4x CPE kit from BroadSoft Xchange at
www.broadsoft.com/xchange. Extract the DeviceManagementDefaults.DTAF.zip file from
the CPE kit. This is the import file.
Log in to BroadWorks as an administrator. Browse to System Resources
Identity/Device Profile Types and select Import. Select Browse to find the extracted DTAF
file and click OK to start the import.
After the import finishes, the following post-import configuration steps must be completed.
Browse to System Resources Identity/Device Profile Types and perform a search to
find the imported DeviceManagementDefaults device profile type. Browse to the Profile
page and change the Device Management Device Access FQDN to your Xtended
Services Platform or Xtended Services Platform cluster address.
Example:
Figure 39 Device Access FQDN
Next, using the Files and Authentication link, select the option to rebuild all the system
files.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals