Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
74
Do not Disturb allows the system to reject all incoming calls automatically. You can
activate the DND mode for the system when it is idle, and the DND mode will be
deactivated after the system places a call. You can also activate the DND mode for the
system during a call, and the DND mode will be deactivated after the system ends the
call.
The DND parameter on the system is described below:
Parameter
Description
Configuration Method
DND
Enables or disables DND mode
on the system.
Default: Disabled
Remote Control
Web User Interface
To configure DND via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of DND.
3. Click Confirm to accept the change.
If Enabled is selected, the display device will display , and the LCD screen of
the VCP40 phone will display .
To configure DND via the remote control:
1. Select Menu->Call Features ->Call Type.
2. Check the DND checkbox.
3. Press the Save soft key to accept the change.
The display device will display , and the LCD screen of the VCP40 phone will
display .

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English