Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
76
2. Select the desired value from the pull-down list of Auto Answer.
3. Select the desired value from the pull-down list of Auto Answer Mute.
4. Select the desired value from the pull-down list of Auto Answer Multiway.
5. Click Confirm to accept the change.
If Enabled is selected, the display device will display , and the LCD screen of
the VCP40 phone will display .
To configure auto answer via the remote control:
1. Select Menu->Call Features.
2. Check the Auto Answer checkbox.
3. Check the Auto Answer Mute checkbox.
4. Check the Auto Answer Multiway checkbox.
5. Press the Save soft key to accept the change.
The display device will display , and the LCD screen of the VCP40 phone will
display .
The call match feature allows the system to search entries automatically from the search
source list based on the entered string, and display results on the pre-dialing screen. If
no list is added to the search source list, the system will not perform a search even if call
match is enabled. For more information about how to configure source list, refer to
Search Source List in Dialing on page 126 .
Parameter of call match on the system is described below:
Parameter
Description
Configuration Method
Call Match
Enables or disables the call
match feature on the system.
Remote Control
Web User Interface

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English